Jump to content


Headlamp Adjustment


  • Please log in to reply
3 replies to this topic

#1 Guest_lowsen23_*

Guest_lowsen23_*
  • Guests

Posted 29 June 2010 - 07:42 AM

I have just had the nearside headlight out to remove water from inside of it and now find the beam requires adjustment.
Can anyone tell me the what the hexagon socket screw and the square headed screw adjusts.
Water was apparently entering from a defective cap seal for access to the bulbs.

#2 paul.h

paul.h

    Forum Police

  • Moderator
  • PipPipPip
  • 2547 posts
  • Gender:Male
  • Location:Warrington

Posted 29 June 2010 - 09:57 PM

From memory (not shown in Haynes) the white (?) one on top does height adjustment so the other must do sideways adjustment. Set the dash leveling switch at O before making any adjustments.
  • 0

#3 Guest_lowsen23_*

Guest_lowsen23_*
  • Guests

Posted 30 June 2010 - 08:36 AM

From memory (not shown in Haynes) the white (?) one on top does height adjustment so the other must do sideways adjustment. Set the dash leveling switch at O before making any adjustments.



#4 Guest_lowsen23_*

Guest_lowsen23_*
  • Guests

Posted 30 June 2010 - 08:40 AM

Hi Paul, thanks for your advice, I have now done the levelling.
The hex.screw did the up/down levelling.




Ford Galaxy Owner Club