suisse Posted September 21, 2014 Share Posted September 21, 2014 I purchased a c3 pluriel 16 2004, for my partner and the vehicle has the following problem.More often than not, when I try to start the vehicle, the key turns and nothing happens. The vehicle is in the N position with my foot on the brake pedal. Then the vehicle shows a spanner and the engine light on the dash and the vehicle goes into auto mode. The vehicle will not start nor can I now select or change gears with the selector or paddles.I then have to take the plus terminal off the battery wait a minute and reconnect and then turn the key so the dash lights come on, but not to start position with my foot on the brake pedal. This then resets the gearbox and the vehicle goes to the 1st gear after a few minutes, whereby I can then select neutral. The vehicle then starts no problems.I have purchased a new battery and it still has the same issue.I was thinking now of replacing the ECU?Any thoughts would be really appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
Bry Posted September 30, 2014 Share Posted September 30, 2014 Hi could also be the the circit board that the gear leaver is part of, you will need a dianostic test unfortunatly to find the problm Quote Link to comment Share on other sites More sharing options...
Bry Posted September 30, 2014 Share Posted September 30, 2014 Could also be the foot brake switch Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.